• XH-31HF (90 ℃ halogen-free low smoke flame-retardant crosslinkable cable sheath material)
XH-31HF (90 ℃ halogen-free low smoke flame-retardant crosslinkable cable sheath material)
+

XH-31HF (90 ℃ halogen-free low smoke flame-retardant crosslinkable cable sheath material)

This material is based on EVA (ethylene vinyl acetate copolymer elastomer).

Still deciding? Get the samples first,Contact us!

XH-31HF (90 ℃ halogen-free low smoke flame-retardant crosslinkable cable sheath material)

This material is based on EVA (ethylene vinyl acetate copolymer elastomer).

Still deciding? Get the samples first,Contact us!

  • Description
  • Product Description
    The XH-31HF type 90 ℃ halogen-free low smoke flame-retardant cable sheath material produced by our company is based on EVA (ethylene vinyl acetate copolymer elastomer) as the basic material, supplemented with flame retardants, smoke suppressants, anti-aging agents, vulcanizing agents, etc., fully mixed by an internal mixer. It is designed specifically for the production of halogen-free low smoke flame-retardant wire and cable, equivalent to the SHF2 type sheath in IEC60092-359 standard. This type of product is widely used in wire and cable enterprises in European countries such as the UK, France, and Germany. It has the characteristics of halogen-free, low smoke, flame retardant, oil resistance, heat resistance, low temperature resistance, low toxicity, environmental protection, easy processing, and easy storage.
    Product Usage
    This product can be used as an insulation for low-voltage cables with halogen-free, low smoke, and flame-retardant requirements, as well as an outer sheath for motor leads, locomotive and vehicle cables, subway cables, nuclear power plant cables, or similar applications. The cable can be used for a long time at temperatures ranging from -40 to 90 ℃. This material has high flexibility, is easier to bend and move, and is convenient for cable installation and laying. The color is black, and other light colored products can also be provided according to user requirements.
    Overall performance indicators

    Test project

    Company

    Typical values

    Test project

    Company

    Typical values

    Mechanical properties before aging, tensile strength, elongation at break

    MPa %

    9.3 180

    Corrosive pH value and conductivity of combustion gases

    μs/mm

    5.6   1.7

    Retention rate of tensile strength and elongation at break after aging of air box at 120 ℃ for 168 hours

    % %

    115 80

    Electrical performance, room temperature, volume resistivity, breakdown field strength

    Ω·cm kV/mm

    4×1014 22.5

    100 ℃, 70h immersion in ASTM2 # oil, tensile strength retention rate, elongation at break retention rate

    % %

    75  80

    Raw rubber characteristics ML (1+4), 100 ℃ coke burning time (T5120 ℃)

    Min:s

    20.3    11:07

    70 ℃, 168h immersion of 0 # light diesel oil, tensile strength retention rate, elongation at break retention rate

    % %

    60  60

    Sulfurization characteristics (165 ℃, 16M) TS1 T90

    Min:s Min:s

    1:02 6:11

    Low temperature stretching at -40 ℃

    %

    26

    Density

    g/cm³

    1.46

    Oxygen index

    %

    31

    SHORE hardness

    A

    80

    Processing process parameters
    It can be extruded and produced on a regular rubber extruder, and it is recommended to use a CV (continuous vulcanization) production line.
    Extruder compression ratio: 1.1:1 to 1.5:1;
    Extruder length to diameter ratio: 6:1 to 16:1; (For aspect ratios less than 10:1, it is recommended to use hot feeding);
    Temperature setting: 70-90 ℃
    Sulfurization temperature: It is recommended to maintain a temperature of 180-200 ℃ inside the vulcanization tube
    Packaging and Storage
    The product is packaged in cardboard boxes and lined with polyethylene bags. The film shape is continuous film or provided according to user requirements, with a net weight of 25Kg per box and 20 bags as one supply unit. The safe use period at room temperature is one year. The product should be stored in a clean, dry, cool, and ventilated warehouse.

Query now

Note: Please leave your email address and our professionals will contact you as soon as possible!